Support Forum
The Forums are a place to find answers on a range of Fortinet products from peers and product experts.
lokewing
New Contributor

Trunk Port and access Port

Hi All,

 

Below is my planning for my network structure, Currently i using fortigate 100d with firmware v5.2.2,build642 (GA), refer to my attach file, after i created the trunk port for my wireless access point for broadcast multiple SSID with different VLAN,  i unable to create other ports to access port, any one can guide me how to do this configuration?  

4 REPLIES 4
lokewing
New Contributor

Forgotten attach my currently config screen shot

 

iJake
Contributor

They won't have any VLAN tags by default, you probably want to create a switch with those ports which can by done by Create New > Interface and then select switch as the "Type" and then select those ports as members.

......

-Jake

...... -Jake
emnoc
Esteemed Contributor III

Qs;

 

Does the  4x AP support 802.1q

 

Are you expecting to run each APs with the same SSID ( multiple SSIDs )

 

PCNSE 

NSE 

StrongSwan  

PCNSE NSE StrongSwan
lokewing
New Contributor

Hi Emnoc,

 

Yes, i want each APs broadcast multiple SSID, but i dont know how to configure trunk port and access port in fortigate, in this environment don't have any management switch.

Announcements

Select Forum Responses to become Knowledge Articles!

Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.

Labels
Top Kudoed Authors