Transparent mode VPNs(How to write the CLI?)

[simson]

Can you tell me how to make it in the transparent mode below?

https://help.fortinet.com/fos60hlp/60/Content/FortiOS/fortigate-ipsecvpn/Transparent_Mode_VPNs/Confi...

<Management station on external network>

[Yurisk]

If you mean how to configure it in CLI, then here is the example:

https://kb.fortinet.com/kb/documentLink.do?externalID=FD31403  

Remember that in Transparent mode only Policy based IPsec is supported, no Interface mode available.