Transparent Mode - On Trunk (VLAN Tagged) Link

[Dipen]

Is it possible to use Fortigate in Transparent Mode between two Switches which are connected via a Trunk Link (VLAN Tagged Link). I tried this but its blocking the traffic even with "ANY-ANY-ANY" policies created in either direction. We are facing this issue at 2 locations which are connected via L2 Radio Links.

[emnoc]

You need to reate subint and policies for  these interfaces;

config system interface   edit VLAN10IN    set type vlan    set interface port1    set vlanid 10  next   edit VLAN100OUT   set type vlan   set interface port2   set vlanid 10  next     edit VLAN11IN    set type vlan    set interface port1    set vlanid 11  next   edit VLAN11OUT   set type vlan   set interface port2   set vlanid 11  next   And then craft policies using the interface definitions between in & out;   config firewall policy  edit 0   set srcintf VLAN10IN   set srcaddr all   set dstintf VLAN10OUT   set dstaddr all   set action accept   set schedule always   set service "HTTPS" "SSH" "DNS" end