Traffic shaping

[sims]

Hi,

I have the attached topology. Traffic shaping is enabled on FG. 

from two isp I have 300 Mbps traffic, ISP A( 200) and B (100 )

Let's say I want to assign 200 Mbps for 10.0.0.0/8 through ISP-A  and 192.168.2.0/24 to ISP B.

How can I do this? 

I created two traffic shapers, ISP-A -200Mbps, and   ISP-B 100Mbps.

Created two policies as below 

policy (1)for 10.0.0.0/8 

policy (2) for  192.168.2.0/24.

Does it work as expected?  

Thanks 

[lobstercreed]

From what you're describing, I see no actual traffic shaping intended.  Instead, you want to use SD-WAN to do policy routing via ISP A or ISP B.

The only reason you'd need shaping is if you wanted to allow 192.168.2.0/24 to go out via ISP A (for example if B was down) but be limited to 100Mbps, leaving 100Mbps for 10.0.0.0/8 on ISP A.

[sims]

Hi ,

Thank you for your reply . I have the load balancer  ( sw in the diagram, Actually I forgot to mark it in the diagram .sorry for that ) after  fortigate firewall 

Thanks

[sims]

Hi,

And also I  want  do traffic shaping   like 10.0.1.0 /24 20 Mbps and 10.0.2.0/24 like this 

Thanks