Support Forum
The Forums are a place to find answers on a range of Fortinet products from peers and product experts.
Liza1
New Contributor III

Traffic Shaping Configuration Issue Affecting Website Access

I have encountered the following issue. I configured Traffic Shaping for several networks that pass through a single interface. I set a bandwidth limit at the IP level (Per IP Shaper) to 10 Mbps. After that, some users started experiencing problems accessing Outlook and certain websites. How can I configure Traffic Shaping so that this limit does not affect the availability of these services and sites?

#FortiGate, #Shaping #Policy

1 REPLY 1
akumar02
Staff
Staff

Hello Liza1,

 

Kindly follow these articles for Traffic shoppers:
https://docs.fortinet.com/document/fortigate/5.4.0/cookbook/107907/limiting-bandwidth-with-traffic-s...

https://community.fortinet.com/t5/FortiGate/Technical-Tip-How-to-apply-traffic-shaping-in-a-firewall...

Try to use the shared shapers and see if that fixes the issue or increase the bandwidth. 

Best Regards,
. . . . . . . . . . . . . . . . . . . . . . . .
Arun Kumar | TAC Engineer II
FORTINET TAC - America EAST
NSE Certified: 1,2,3,4,5,7
Office Hours: 9AM-6PM EST (Tue-Sat)
Contact: https://fortinet.com/support-and-training/support/contact.html
Community Forum: https://community.fortinet.com
# Is there anything Fortinet could have assisted with further, better, or differently?
# Simply request a Manager follow-up
Announcements

Select Forum Responses to become Knowledge Articles!

Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.

Labels
Top Kudoed Authors