- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Traffic Shaping Configuration Issue Affecting Website Access
I have encountered the following issue. I configured Traffic Shaping for several networks that pass through a single interface. I set a bandwidth limit at the IP level (Per IP Shaper) to 10 Mbps. After that, some users started experiencing problems accessing Outlook and certain websites. How can I configure Traffic Shaping so that this limit does not affect the availability of these services and sites?
#FortiGate, #Shaping #Policy
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hello Liza1,
Kindly follow these articles for Traffic shoppers:
https://docs.fortinet.com/document/fortigate/5.4.0/cookbook/107907/limiting-bandwidth-with-traffic-s...
https://community.fortinet.com/t5/FortiGate/Technical-Tip-How-to-apply-traffic-shaping-in-a-firewall...
Try to use the shared shapers and see if that fixes the issue or increase the bandwidth.
. . . . . . . . . . . . . . . . . . . . . . . .
Arun Kumar | TAC Engineer II
FORTINET TAC - America EAST
NSE Certified: FCA, FCF, FCP-NS, FCSS-NS
Office Hours: 9AM-6PM EST (Tue-Sat)
Contact: https://fortinet.com/support-and-training/support/contact.html
Community Forum: https://community.fortinet.com
# Is there anything Fortinet could have assisted with further, better, or differently?
# Simply request a Manager follow-up