Traffic Shaper

[HS08]

I do 5 minutes speedtest to the internet but why in the traffic shapper the utilization seem very low

[BillH_FTNT]

Hi HS08,

The likely issue is that the policy you configured does not cover all traffic. I recommend using Wireshark on your PC to analyze the traffic pattern (IP addresses, ports, etc.) of the speed test. Then, you can adjust your QoS configuration on the gateway accordingly. thanks

Bill

[HS08]

I try to limit my speed to 50Mbps and seem my real traffic limited

This same with the max bandwidth in traffic shapper, but bandwidth utilization always small (only in kbps)