Timezonesetting in 360 Degree Activities Report

[menatwork]

Hi folks,

I am sure this is a very simple to solve problem, but we are unable to find, where to set the correct timzone of our 360 Degree Activities Report on our FGT80F. The FGT80F itself is correctly configured (timezone), but we are getting our reports with US/Arzizona timezone, which is not the timezone we have (Europe/Berlin would be the right one).

What are we doing wrong?

Perhaps you can tell me, what we have to do, to set it up with the correct timezone.

Thank you very much..

Atm its looking like that (wrong timezone)

[rahul_p1]

Hi menatwork,

This report has been generated from Forti analyzer for FortiGate device. Is your FortiGate device has correct time zone configured? if not refer this article :- Setting the system time - Fortinet Community and also please check on Forti analyzer time zone.

Please refer this article to set time zone on Forti analyzer :- Configuring the system time | FortiAnalyzer 7.4.2 | Fortinet Document Library. Please set the correct time zone on Forti analyzer and generate report again and check you should get report in correct time zone.

Thanks 

[menatwork]

Hi,

time-zone is correct. We do not have a fortianalyzer running (if you mean a separate device). We only have got the FGT80F with Cloudreports (Forticloud)