Hello I want ask expert fortinet for this problem !! 1) i configure fortiAP221E in a forticloud .. we test the throughput for this access point, we see the throughput w is good 2) while, we try to configure this FortiAP 221E( same access point ) on controlle, then it gives us that the throughput is very low !!!!??? SO why the throughput is strong for forticloud , then the throughput is very low for the same access point is very low 1Mbits for controller !!???? what is the reason !!!! i wait a repy from expert fortinet to answer me for this problem !! best regards
Nominating a forum post submits a request to create a new Knowledge Article based on the forum post topic. Please ensure your nomination includes a solution within the reply.
What version FOS is running on your FGT? AP version?
Hello
Thanks to reply me wanglei_FTNT
1) Access point 222E v6.0 , bulitd0051,181101(GA): it is configured in mode ethernet , we have are only this AP 222E
====>country Tunisia in addition, we installed far away from interference But always , the throughput is low
2) Version FOS is running on your FGT : 6.0.4
So please if you have other check , you can tell me and in addition I wait your help and your reply
why the throughput is low if we are configure with FGT ??? since it is very stable if it configure with forticloud !!!
thanks in advance
You just mentioned in your previous thread that you have a 221E and now it 's 222E? We don't have known issue like the ones you ran into in these versions. Also, working with FLCD but not FGT indicates that it's most likely some configuration issue. I will have to direct you to our Support for further assistance. This forum is not intended for detailed trouble-shooting. Thank you
Hello
thanks to reply
i want to know what's mean FLCD ???
i talk about 222e for this thread !!!
Please can you give me answer for this problem because you don't help me and you don't give me the exact reason !!!
i wait your reply from expert fortinet and fortiAP !!!!
thanks in adv
Hello thanks to reply i want to know what's mean FLCD ??? i talk about 222e for this thread !!! Please can you give me answer for this problem because you don't help me and you don't give me the exact reason !!! i wait your reply from expert fortinet and fortiAP !!!! thanks in adv
Select Forum Responses to become Knowledge Articles!
Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.
Copyright 2024 Fortinet, Inc. All Rights Reserved.