There is not service on wan2

[mramirezm]

Hello I have a case in which a second link was configured on the wan2 port, the data of Static IP, Mask, gateway (static route), administrative distance 10, as well as wan1 have been entered.

There is a policy that directs a private IP to wan2 (as proof) without any restriction of web filter or control access, however there is no way out to the internet.

When changing the output to the wan1 port there is no problem.

If I configure this service on a separate computer it works fine.

In addition to the configured parameters, is something else necessary?

I have configured other services in the same way without having this problem, I appreciate your help.