TTL hop count change in firewall policy

[deluuq]

Hello,

I am currently encountering an issue with an application, which I suspect is caused by the hop count being set too low in the TTL header. There is a FortiGate firewall in the routing path, so I am wondering whether it is possible to modify the hop count field in packets as they pass through the firewall. I noticed there is an option to change the TTL of the session in seconds; however, I have not found any articles on how to change the IP TTL header.

Does anyone know if this is possible?

Thanks.

[abarushka]

Hello,

I am not aware that it is feasible to modify TTL hop count. Moreover, TTL hop count modification can potentially cause infinite loop in certain situations.

[dovunru2]

Oh my! I have intermittent issue but only on CentOS clients. I was looking for solution for some time now. And I had my assumptions that it must be something with the network. Now I have new clip in my gun and definitely will look into the TTL issue https://mobdro.bio/ .

[deluuq]

Yes, I recently discovered that some applications, for reasons of their own, are designed to set specific TTL values autonomously - maybe it's your case too.

[tachen]

Try this could be a help. 

https://docs.fortinet.com/document/fortigate/7.4.5/cli-reference/158447704/config-firewall-ttl-polic...

config firewall ttl-policy

https://community.fortinet.com/t5/FortiGate/Technical-Tip-Configuring-TTL-Security-Policy-for-BGP/ta...

[deluuq]

Thanks will look into it.