Support Forum
The Forums are a place to find answers on a range of Fortinet products from peers and product experts.
Lucascat
New Contributor III

System link-monitor is not working after 5.6.11 upgrade

System link-monitor is not working as expected. When the gateway ping comes back up, the routes remains down anyway. I have to disable and re-enable link-monitor for that interface.

I have an open case with Fortinet

1 Solution
sw2090

I found a forum post referring the very same bug in v.5.2. So looks like if Fortinet brought back an old old bug in 5.6.11 :\

As back in 5.2 executig "exec router restart" temporarily fixes it until the next WAN outage.

-- 

"It is a mistake to think you can solve any major problems just with potatoes." - Douglas Adams

View solution in original post

-- "It is a mistake to think you can solve any major problems just with potatoes." - Douglas Adams
21 REPLIES 21
sw2090

I found a forum post referring the very same bug in v.5.2. So looks like if Fortinet brought back an old old bug in 5.6.11 :\

As back in 5.2 executig "exec router restart" temporarily fixes it until the next WAN outage.

-- 

"It is a mistake to think you can solve any major problems just with potatoes." - Douglas Adams

-- "It is a mistake to think you can solve any major problems just with potatoes." - Douglas Adams
tioeudes
Contributor

Same thing here. It happened before when upgraded from 5.2 to 5.4.

As usual, nothing on the release notes.

Announcements
Check out our Community Chatter Blog! Click here to get involved
Labels
Top Kudoed Authors