Support for 2.4 GHz device

[Botulo]

Hello,

Looking for best way to configure one of multiple wireless 223E repeaters so it broadcasts on a dedicated 2.4 GHz SSID.  Is this configured at the switch MGMT port or on the repeater itself?  There are multiple units all with the same SSID and password and both frequencies active, so there's no control over 5GHz or 2.4GHz connection.  My device does not work with 5 GHz.  Thank you.

[Anthony_E · Accepted solution]

Hello,

Thanks a lot for your contribution in Community.

May I propose you to have a look in our Knowledge Base, under this section:

https://community.fortinet.com/t5/FortiAP/tkb-p/TKB3?pageNum=1

You will find articles concerning FortiAP which could help you.

If you do not find any answers do not hesitate to come back to us, we will find somebody to help you.

Regards,