Can anyone provide details for a suitable Fortinet AP to be used in Site Survey Mode, in particular a current FAP model?
We are currently using an AP832e but its looking a bit worse for wear so we need to replace it.
Thanks in advance
Chris
Nominating a forum post submits a request to create a new Knowledge Article based on the forum post topic. Please ensure your nomination includes a solution within the reply.
Hi Chris,
It depends on your exact requirements. You can compare all current FortiAP models at the bellow resources:
https://www.fortinet.com/content/dam/fortinet/assets/data-sheets/fortiap-series.pdf
HTH,
Boris
Hi,
Does this mean that since 2018 all Fortinet APs have site survey capabilities?
Because this article in 2018 says there's only 4 recommended APs and they are all EoL now.
https://www.fortinetguru.com/2018/08/fortiwlc-sitesurvey/
Cheers,
Rory
Created on 11-30-2022 08:47 AM Edited on 11-30-2022 08:50 AM
Yes you just need to set them to site survey mode using CLI.
You can use FortiPlanner for site survey functionality.
See page 19 of the admin guide: https://docs.fortinet.com/document/fortiplanner/2.2.0/fortiplanneruserguide
Select Forum Responses to become Knowledge Articles!
Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.
User | Count |
---|---|
1713 | |
1093 | |
752 | |
447 | |
231 |
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.
Copyright 2024 Fortinet, Inc. All Rights Reserved.