Hello,
I have a FG-VM01 currently setup on our ESXi server.
I am trying to have multiple vlan/subnets off of one of the physical ports (currently setup as internal and external - ports 1 &2). Currently port 1 is l3 with an IP for internal servers. When I add subinterfaces for the guestnet and internal wifi vlans I am not getting DHCP on the devices coming in with that tagged vlan.
Then I tried to put 0.0.0.0/32 on port 1 and move the server network into a subinterface vlan and it completely just stopped working, I can't ping the gateway from the same subnet the server is on.
Is there something I am missing; am I configuring this right? This should be possible correct?
Attaching some screenshots.
Thanks in advance!
Charles
Nominating a forum post submits a request to create a new Knowledge Article based on the forum post topic. Please ensure your nomination includes a solution within the reply.
Anyone have any advice/suggestions/tips?
Sure,
You need to take a look on your esx configuration.
Your option is to tag at the vm level itself. In order to do this, your protgroup need to be use VLAN tag of 4095, which allows all VLANs to pass through.
The physical interface should be connected to a trunk port to your VM / Switch
You shouldn't have an IP on the physical interface only on the sub interfaces
The VLAN ID is the Vlan tag
You will then need firewall polices to allow traffic to and from the sub-interfaces
Select Forum Responses to become Knowledge Articles!
Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.
User | Count |
---|---|
1712 | |
1093 | |
752 | |
447 | |
231 |
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.
Copyright 2024 Fortinet, Inc. All Rights Reserved.