Static routing using less specific route 7.0.14

[FredH]

We are currently deploying a Fortinet at a client (ver 7.0.14) and have added two static routes:

192.168.0.0/16 -> LAN

192.168.100.0/24 -> Port1

Any traffic sent to the 192.168.100.0/24 network is still sent to LAN.  We have reduced the AD and Priority for the more specific route, but this has still not helped. When checking which route is used for traffic to the 192.168.100.0 network the CLI output shows that the 192.168.0.0 route is used.

[Toshi_Esumi]

That's expected. Because the /24 route to Port1 is more specific than the /16 route to LAN. Or did you mistype and actually those routes are reversed?

Toshi

[FredH]

HI Toshi,

Yes it was a mistype and the /16 is being used instead of the /24.

[Toshi_Esumi]

Then please share us routing table with "get router info routing-table all". You can remove unrelated routes.

Toshi