Static routes configurations not reflecting on the RIB/Routing table after upgrade to 7.4.4

[martyyy]

Is this a known bug for 7.4.4 ? Currently using Dynamic Gateway

Interface "A" enabled - distance "5" Priority "5"

Interface "B" enabled - distance "5" Priority "1"

This is the only result Im getting:
# get router info routing-table de
Codes: K - kernel, C - connected, S - static, R - RIP, B - BGP
O - OSPF, IA - OSPF inter area
N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
E1 - OSPF external type 1, E2 - OSPF external type 2
i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, ia - IS-IS inter area
V - BGP VPNv4
* - candidate default

Appreciate any suggestions or troubleshooting guide. TIA :) 

[rvillaroman]

Hi @martyyy,

Could you check if those routes are on the database? Kindly run "get router info routing-table database"

Regards,