Support Forum
The Forums are a place to find answers on a range of Fortinet products from peers and product experts.
rtegani
New Contributor

Static Routes issue using 6.0.3 Firmware

Hi guys,

 

I am using the new firmware version (6.0.3) and I got one issue using static route. If you already have any route to a specific GW and you try to add a new one to the same specific GW, the Fortigate shows the follow message.

"Gateway IP and interface conflict with Static Route #"

 

How to fix it?

Save your route using another GW IP. After that, right-click on the Route you want to change and click ">_Edit in CLI".

Run the command "set gateway 10.1.3.5", then type "end" and close the CLI Console.

 

Refresh your browser and you will see the result.

 

@Fortigate team, please provide an update to fix it up.

21 REPLIES 21
pyy
New Contributor III

From CLI is possible ?

PeterK
New Contributor

I was able to configure from the CLI.  The new firmware  (6.0.4) is due for release on the 18th December.

Top Kudoed Authors