Splitting VLANs Across Separate Trunks

[thunder7972]

Hi, I'm relatively new to FortSwitch and come from Cisco land - so please forgive my ignorance in advance :smiling_face_with_smiling_eyes:

We’re looking into purchasing some Fortinet switches and have a requirement to send traffic in different VLANs across separate physical links. My question is, would it be possible to create different trunks and then isolate specific VLANs to specific trunks?

For example, VLANs 10 and 20 on Trunk 1 only, while VLANs 30 and 40 would be allowed over Trunk 2 only.

For some additional context, the switches would likely be managed using FortiOS via FortiLink as our existing firewalls are FortiGates. We’d also be looking to include access and distribution level switches in the architecture.

Thanks!

[sahmed_FTNT · Accepted solution]

I think you can achieve this target.
https://docs.fortinet.com/document/fortiswitch/6.4.5/administration-guide/146333/vlans-and-vlan-tagg...