Hi All,
I created an IPSec VPN tunnel for remote Access "VPN for MAC" and Client Address Range 172.30.1.1-172.30.1.254.
Soon after that I deleted it as all of a sudden it stopped working.
Now I'm trying to re-create IPSec VPN tunnel with the same name "VPN for MAC" and the same Client Address range but getting the error on the screenshot.
Could you please advise how to delete the original tunnel entry.
Solved! Go to Solution.
Nominating a forum post submits a request to create a new Knowledge Article based on the forum post topic. Please ensure your nomination includes a solution within the reply.
Hi @MadDog_2023,
Please check on the GUI > Policy & Objects > Addresses and make sure "VPN for MAC" or IP range "172.30.1.1-172.30.1.254" is not there.
Regards,
Under Policy & Objects \ Address I found an address group "VPN for MAC_split" that was the reason of my issue.
Deleting that group resolved it.
Hello,
Did you verify the tunnel entry on the GUI >>Under the IPsec Tunnel, and any Policy for the Tunnel delete it from the entry, and delete the tunnel.
Again you can re-create with same Tunnel Name:
Let us know your Firmware Version ?
Refresh or Clear Configuration Cache:
execute update-now
Hi @MadDog_2023,
Please check on the GUI > Policy & Objects > Addresses and make sure "VPN for MAC" or IP range "172.30.1.1-172.30.1.254" is not there.
Regards,
Under Policy & Objects \ Address I found an address group "VPN for MAC_split" that was the reason of my issue.
Deleting that group resolved it.
Select Forum Responses to become Knowledge Articles!
Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.
User | Count |
---|---|
1702 | |
1092 | |
752 | |
446 | |
228 |
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.
Copyright 2024 Fortinet, Inc. All Rights Reserved.