Hi all..
On my FortiWiFi 60F v7.0.6 build0366 , speed led lighting Orange / wan1 ... how can i check bandwidth rate and solve,,,,, thank you.
Nominating a forum post submits a request to create a new Knowledge Article based on the forum post topic. Please ensure your nomination includes a solution within the reply.
Looks like a 100 Mbps connection.
Try this to confirm:
gate8 # get sys int physical wan1
== [onboard]
==[wan1]
mode: static
ip: 10.10.234.1 255.255.255.0
ipv6: ::/0
status: up
speed: 1000Mbps (Duplex: full)
It depends on your WAN connection whether 100 Mbps would be a bottleneck or not.
Additional info:
gate8 # diag hardware deviceinfo nic wan1
Description :FortiASIC NP6XLITE Adapter
Driver Name :FortiASIC NP6XLITE Driver
Board :80F
lif id :0
lif oid :64
netdev oid :64
Current_HWaddr 94:ff:3c:35:e4:d2
Permanent_HWaddr 94:ff:3c:35:e4:d2
========== Link Status ==========
Admin :up
netdev status :up
autonego_setting:1
link_setting :1
speed_setting :1000
duplex_setting :0
Speed :1000
Duplex :Full
link_status :Up
============ Counters ===========
Rx Pkts :62860210
Rx Bytes :80248730266
Tx Pkts :33334219
Tx Bytes :6885528921
Host Rx Pkts :52872511
Host Rx Bytes :70254983785
Host Tx Pkts :26490746
Host Tx Bytes :3031272405
Host Tx dropped :0
FragTxCreate :0
FragTxOk :0
FragTxDrop :0
Select Forum Responses to become Knowledge Articles!
Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.
User | Count |
---|---|
1713 | |
1093 | |
752 | |
447 | |
231 |
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.
Copyright 2024 Fortinet, Inc. All Rights Reserved.