Support Forum
The Forums are a place to find answers on a range of Fortinet products from peers and product experts.
DennisvanDriel
New Contributor II

Sonos/ Fortigate 60e / 7.2.1 / AP

I have an Fortigate 60E with on port 7 with a Fortigate 48 ports switch connected trough Fortlink with IP adres 192.168.5.1 - 192.168.5.254.

 

On my FortiSwitch a have a VLAN ID 60 for Wifi with adres 192.168.2.1/255.255.255.0.

 

On port 40 of my switch i have an Fortigate AP (FC24JE). with adres 192.168.2.25

 

I have an WiFi SSID Sonos with adres 192.168.6.1/255.255.255.0.

 

I can registrate my Iphone on it an get an ip adres 192.168.6.25.

 

But i cannot install my Sonos with the Sonos ap. De app will not find my Sonos system.

 

How can i fix this.

 

With regards

 

Dennis

 

 

 

1 Solution
gfleming

It should work by default. You can try enabling igmp snooping on the VAP. Also check the status of these commands?

config system settings
    set multicast-forward enable
    set multicast-ttl-notchange enable
end

# config router multicast
    set multicast-routing disable
end

Cheers,
Graham

View solution in original post

14 REPLIES 14
jhussain_FTNT

Hi Dennis,

 

Are you able to browse any website when you connect to the Sonos SSID with the client device.

 

Secondly did you have configured any UTM on the Sonos SSID to wan Interface firewall policy, if so kindly test with disabling the UTM and let us known if you were able to download the Sonos application.

 

Regards

Jamal

 

 

DennisvanDriel

I have make an Firewall policy Rule from the WAN to the SSID Sonos and from SSID Sonos to WAN.

 

I have internet on my iphone on the SSID Sonos. Everything is working well.

I can download the Sonos app form the app store, but i cannot install my Sonos system because the app cannot find the system.

 

I also set the Mulitcast policy from WAN to SSID Sonos and back.

 

Every UTM are disabled.

 

With regards,

 

Dennis

 

gfleming
Staff
Staff

Is your phone on the same Sonos wi-fi network when you are trying to find the Sonos system?

Cheers,
Graham
DennisvanDriel
New Contributor II

Yes it is

gfleming

can you post output of:

show full wireless-controller vap <YOUR_SSID_NAME> | grep igmp

show full wireless-controller vap <YOUR_SSID_NAME> | grep multicast
Cheers,
Graham
DennisvanDriel

set igmp-snooping disable

 

set multicast-rate 0

set multicast-enhance disable

gfleming

Are your APs in bridge mode or tunnel?

Cheers,
Graham
DennisvanDriel

AP is in tunnel mode

gfleming

It should work by default. You can try enabling igmp snooping on the VAP. Also check the status of these commands?

config system settings
    set multicast-forward enable
    set multicast-ttl-notchange enable
end

# config router multicast
    set multicast-routing disable
end

Cheers,
Graham
Labels
Top Kudoed Authors