Hello,
I have a question with setting up an IPSec tunnel using IKEv2. In the FortiGate only one PSK needs to be specified. But in the Cisco ASA wizard I need to specify two PSK's. One from the local Cisco ASA and from the remote (FortiGate). How do I need to configure this, do I need to only add one PSK to the Cisco ASA, or is there an other solution?
kind regards,
Geert
Solved! Go to Solution.
Nominating a forum post submits a request to create a new Knowledge Article based on the forum post topic. Please ensure your nomination includes a solution within the reply.
Hello @Geert_m ,
You can configure the remote psk via CLI.
Also, you can review this community discussion.
https://community.fortinet.com/t5/Support-Forum/Set-two-different-psk-ikev2/td-p/65334
config vpn ipsec phase1-interface
edit <VPN_NAME>
set authmethod-remote psk
set psksecret-remote <YOUR_PSK_KEY>
next
end
Hello @Geert_m ,
You can configure the remote psk via CLI.
Also, you can review this community discussion.
https://community.fortinet.com/t5/Support-Forum/Set-two-different-psk-ikev2/td-p/65334
config vpn ipsec phase1-interface
edit <VPN_NAME>
set authmethod-remote psk
set psksecret-remote <YOUR_PSK_KEY>
next
end
Select Forum Responses to become Knowledge Articles!
Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.
User | Count |
---|---|
1707 | |
1093 | |
752 | |
446 | |
231 |
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.
Copyright 2024 Fortinet, Inc. All Rights Reserved.