Hello! I created Site-To-Site IPsec VPN between 100d and 61e.
But once in each day it goes down.
I looked at Log&Report at VPN Events and saw that phase 2 IPSec is down.
Does anybody know how to solve this problem?
Solved! Go to Solution.
Nominating a forum post submits a request to create a new Knowledge Article based on the forum post topic. Please ensure your nomination includes a solution within the reply.
In the phase2 config, button 'Advanced', you can enable 'autonegotiate'. Strictly speaking, one side should do but it doesn't harm if you enable it on both sides of the tunnel.
Phase1 autonegotiate apparently is already enabled.
In the phase2 config, button 'Advanced', you can enable 'autonegotiate'. Strictly speaking, one side should do but it doesn't harm if you enable it on both sides of the tunnel.
Phase1 autonegotiate apparently is already enabled.
Solved!
Problem was in autonegotiation at phase 2.
1. diagnose vpn tunnel list - and copy the name of our vpn tunnel on each of 2 fortigates.
2. Do this commands with appropriate VPN tunnel name on each of fortigate:
config vpn ipsec phase2-interface edit <name> set auto-negotiate enable end
Select Forum Responses to become Knowledge Articles!
Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.
User | Count |
---|---|
1468 | |
1007 | |
748 | |
443 | |
206 |
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.
Copyright 2024 Fortinet, Inc. All Rights Reserved.