Single SSID with different subsite's VLAN

[kdevos]

Hi

I'm currently replace a CISCO wifi solution by FortiAP one.

Actually, SSID'd are the same on all my subsite, but VLAN are different on each subsite.

For example :

[ul]

SITE1, SSID=WIFIINVITE on VLAN=125

SITE2, SSID=WIFIINVITE on VLAN=135

...[/ul]

On my forti wifi controller (200D), the SSID is linked to a single VLAN. Is there a way to configure each SSID on each subsite to use a different VLAN ?

Thanks for your help, Kevin

[kdevos]

Yes, but i would like to keep a logic association of VLAN and subnets.

So no way with fortinet :) I will keep cisco.

[yzhang_FTNT]

The wtp-group based VLAN feature in FOS 5.4 release could solve your issue.  This feature is only supported in the CLI at this time.

You first create wtp-groups, then under the vap config, you can create vlan-ID/wtp-group pairs.

If a WTP is assigned to a wtp-group, its client will be tagged with the vlan-id associated with wtp group.

[bravishank_FTNT]

Follow the below configuration for WTP-Group based on VLAN Pool

FGT-ABC # show wireless-controller wtp-group Group-223B config wireless-controller wtp-group     edit "Group-221B"         set platform-type 221B ----------------------> Platform Type         config wtp-list             edit "FP221B3X15001114"-------------------> FAP Serial Number             next         end     next

edit "Group-223B"         set platform-type 223B ----------------------> Platform Type         config wtp-list             edit "FP223B3X15001115"-------------------> FAP Serial Number             next         end     next end FGT-ABC # show wireless-controller vap WTP-Group        config wireless-controller vap     edit "WTP-Group"         set vdom "root"         set ssid "WTP-Group"         set schedule "always"         set vlan-pooling wtp-group-------------------> VLAN Pool to WTP-Group         config vlan-pool             edit 101-----------------------------------> VLAN ID for Wireless Clients                 set wtp-group "Group-221B"

            next

            edit 102-----------------------------------> VLAN ID for Wireless Clients

                set wtp-group "Group-223B"             next         end         set passphrase ENC IkCbYh/M9oxQFnGijRRGf08J4LMc3njIrd7bvFYupyn1JxbgJUITyAT4NnJepMi2lfutuX4xQ4KKwNtwo6zd6aAzgmUw3B3VqprDFWZztnShVVULDjHE37BmHHVul3d0VQ8+gjXGETwRYV+XGA7Y1emtykO8CLIALqSIaPw4xUe23E79ADI73JeQAOz5smpbz1AZvA==     next end

You can add upto 8 VLAN IDs in a VAP.