Shutdown slave FGT500D 6.2

[minoss]

Hello,

i need reboot slave in HA, how i proceed.

Thanks

[Philippe_Gagne]

Hi,

The easiest way I use is in 6.2.1 CLI:

exec ha manage 0 admin     ( 0 can be 1, depanding of the order!)

From there, you will be able to do "exec shutdown" command.

Regards,

Phil

[Viknesh_Muniyandi]

#get system ha status (You would see which box is Master and which one is in slave mode) If it shows 1, which means it's Master If it shows 0, which means it's slave #exe ha manage 0   (to get control of the slave unit) #get system status  (to get details of the slave unit) #exe reboot (say: Y) There you go!!