Show mac address by physical port

[greyes]

Hello

In cisco switches you are able to "show" mac address by port with "show mac address-table interface gigabitEthernet0/1" it is possible to do the same in a Fortigate appliance?

Thanks

[Stephen_Roddick]

@huutrung07 You won't see the Cisco MAC or ARP Tables on your Fortigate with this setup.

You say you've set up the Cisco as a layer 3 router not a layer 2 switch.  None of the MAC information will be passed to the Fortigate in a routed environment.

S.

[clubinski]

diag switch-controller mac-cache show 

It will show you each switch (Serial Number) then what vlan id , prot and mac address of the device if connected. 

It also shows when it was last seen on the port. 

[FranciscoSilva]

diagnose switch mac-address list