Show console printouts in SSH session

[AlexFerenX]

Hi!

Is there a FortiOS CLI command to show printouts being sent to serial/console in a SSH session (akin to NX-OS' "terminal monitor")?
Thanks!

PS. I'm not seeking "diagnose debug config-error-log read".

[ebilcari]

Are you interested on FGT or FSW output? As I know there is no option equivalent to "terminal monitor" but the closest could be "#execute log" as shown in this article.
If you want to keep track of config changes you can use:

GW # diagnose debug cli 8

GW # diag debug enable