Sharing WAN - Forti D60

[bargul]

I have problem. First my English is no good sorry. I have switch DCN 5960 and on the switch 3 Vlan' s : 100, 200, 300. 100 - Internet subnet 192.168.1.0/24 gateway 192.168.1.2 , 200 subnet 192.168.2.0/24 gateway 192.168.2.1 and 300 - 192.168.3.0/24. gw 192.168.3.1. On the switch is gateway deafault 0.0.0.0 192.168.1.1. All out in 192.168.1.2. This address is adress Internal Fortigate D60. On Fortigate D60 Network/Interface' s are 2 WAN for example WAN1-1.1.1.1 and WAN 2 - 2.2.2.2 and internal 192.168.1.1. On Network/routing in Forti I have 0.0.0.0/0.0.0.0 gateway 1.1.1.1 device WAN1 - static routing, 0.0.0.0/0.0.0.0 - gw 2.2.2.2 device WAN 2 and 192.168.0.0/255.255.0.0 gw 192.168.1.2 device Internal I would like then subnet 192.168.2.0/24 (Vlan 200) have connect with WAN 1 and subnet 192.168.3.0/24 (Vlan 300) have connect WAN2 I try in policy set but nothing.

[Mark_Oakton]

Have you tried first with individual devices each side of the firewall to see if the fortigate is setup correctly? Also I would have a separate switch for the wan conneciton