Setup Fortigate 6.4.2 HA

[soheil_amiri]

hi dears

i trying to setup 2 hyper-v fortigate 6.4.2 as a Active-passive HA solution. from this guide i setup first device. it marks as a primary firewall, then i configure the second device,i get this error "can not set mac address".

i enable "mac address spoofing" on all 4 NIC of firewalls.

what is the problem ?

[soheil_amiri]

hi guys

my mistake was i using one switch, for all 4 (DMZ,LAN,HA,MGMT) connection. after separating switch my second device join the primary device.

tanks