My friends,
Is it possible to set the channel band more than 20Gz (radio 1 - 2.4G)? I wanna to use 40G - 300Mbps!!!
Thank you very much,
Marcio - HX BRASIL.
Nominating a forum post submits a request to create a new Knowledge Article based on the forum post topic. Please ensure your nomination includes a solution within the reply.
Hi Marcio,
Yes, you can configure channel bonding on 2.4GHz radio-1 and set it to 40MHz. By configuring channel-bonding to 40MHz and enabling short-guard-interval you can set bit rate to 300 Mbps.
Below are the configuration:
config wireless-controller wtp-profile edit "FAPC24JE-default" config platform set type C24JE end set ap-country US config radio-1 set band 802.11n set short-guard-interval enable set channel-bonding 40MHz end
Let me know if you need additional information.
Thanks,
Jay
Select Forum Responses to become Knowledge Articles!
Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.
User | Count |
---|---|
1634 | |
1063 | |
751 | |
443 | |
210 |
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.
Copyright 2024 Fortinet, Inc. All Rights Reserved.