Support Forum
The Forums are a place to find answers on a range of Fortinet products from peers and product experts.
marciohx
New Contributor

Setup Channel Band C24JE

My friends,

 

Is it possible to set the channel band more than 20Gz (radio 1 - 2.4G)?  I wanna to use 40G - 300Mbps!!!

 

Thank you very much,

Marcio - HX BRASIL.

1 REPLY 1
JayD_FTNT
Staff
Staff

Hi Marcio,

 

Yes, you can configure channel bonding on 2.4GHz radio-1 and set it to 40MHz.  By configuring channel-bonding to 40MHz and enabling short-guard-interval you can set bit rate to 300 Mbps.

 

Below are the configuration:

config wireless-controller wtp-profile     edit "FAPC24JE-default"         config platform             set type C24JE         end         set ap-country US         config radio-1             set band 802.11n             set short-guard-interval enable             set channel-bonding 40MHz         end

 

Let me know if you need additional information.

 

Thanks,

Jay

Top Kudoed Authors