Setup Channel Band C24JE

[marciohx]

My friends,

Is it possible to set the channel band more than 20Gz (radio 1 - 2.4G)?  I wanna to use 40G - 300Mbps!!!

Thank you very much,

Marcio - HX BRASIL.

[JayD_FTNT]

Hi Marcio,

Yes, you can configure channel bonding on 2.4GHz radio-1 and set it to 40MHz.  By configuring channel-bonding to 40MHz and enabling short-guard-interval you can set bit rate to 300 Mbps.

Below are the configuration:

config wireless-controller wtp-profile     edit "FAPC24JE-default"         config platform             set type C24JE         end         set ap-country US         config radio-1             set band 802.11n             set short-guard-interval enable             set channel-bonding 40MHz         end

Let me know if you need additional information.

Thanks,

Jay