Support Forum
The Forums are a place to find answers on a range of Fortinet products from peers and product experts.
jkchoa
New Contributor

Setting up vlan fortigate 60e

Hi, Can you please refer me a cookbook link, on setting up vlan for 2networks comprising of PCs and cctv ip cameras. The PCs are on 192.168.100.x and have currently gateway to the firewall for internet, while the ipcamera cctv are on different subnet 192.168.200.x, these devices needs to have routing or rather can see the other pc network and initially needs not to have internet. Really could use some examples, to get some knowledge and get started
22 REPLIES 22
mahesh_secure

Hi,

 

 

also i see that all the interface is in untagged mode only. the port you have connected to fortigate must be tagged mode if you create vlan in fortigate interface. 

 

 

Regards

Mahesh

jkchoa

Mahesh,

for #3. try connect another laptop in switch and set ip address as 192.168.200.13 and try to ping the 192.168.200.12

I tried a PC 192.168.200.251 and laptop 192.168.200.12, both can see each other and cannot see the gateway 192.168.200.253 interface on the HP 1910 switch.

In my initial post, I thought we can setup VLAN on the fortigate, however as per analysis there should also VLAN ids setup on the switch.  I tried asking HP forum guys about the unusual behavior of the hp1910, am not sure its working the way it should.

jkchoa

Hi Mahesh/Ede, Can I ask for your suggestions what to do next? Here's what I plan to test further: After creating the VLAN: 10 on the FGT with IP 192.168.200.250, and I create also VLAN: 10 on the HP1910 switch with interface IP 192.168.200.253, connect the two devices via tagged port of the HP1910 switch, then on the PC or laptop I assign IP address 192.168.200.11 with gateway 192.168.200.253 Will the above VLAN work ?

Announcements

Select Forum Responses to become Knowledge Articles!

Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.

Labels
Top Kudoed Authors