Nominating a forum post submits a request to create a new Knowledge Article based on the forum post topic. Please ensure your nomination includes a solution within the reply.
Hi,
also i see that all the interface is in untagged mode only. the port you have connected to fortigate must be tagged mode if you create vlan in fortigate interface.
Regards
Mahesh
Mahesh,
for #3. try connect another laptop in switch and set ip address as 192.168.200.13 and try to ping the 192.168.200.12
I tried a PC 192.168.200.251 and laptop 192.168.200.12, both can see each other and cannot see the gateway 192.168.200.253 interface on the HP 1910 switch.
In my initial post, I thought we can setup VLAN on the fortigate, however as per analysis there should also VLAN ids setup on the switch. I tried asking HP forum guys about the unusual behavior of the hp1910, am not sure its working the way it should.
Hi Mahesh/Ede, Can I ask for your suggestions what to do next? Here's what I plan to test further: After creating the VLAN: 10 on the FGT with IP 192.168.200.250, and I create also VLAN: 10 on the HP1910 switch with interface IP 192.168.200.253, connect the two devices via tagged port of the HP1910 switch, then on the PC or laptop I assign IP address 192.168.200.11 with gateway 192.168.200.253 Will the above VLAN work ?
Select Forum Responses to become Knowledge Articles!
Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.
User | Count |
---|---|
1688 | |
1087 | |
752 | |
446 | |
227 |
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.
Copyright 2024 Fortinet, Inc. All Rights Reserved.