Setting up multiple vpn's using batch?

[DKav]

Hi All, I believe I know the answer to this already but... Is it possible to configure multiple vpn's via a "batch job" on a FortiGate 200E?

[emnoc · Accepted solution]

yes, just ensure unique names and ip address for phase1/2 details. You could build a template and just add the ph1/ph2 name and remote-gateway .By default route-based vpn proxyid are 0.0.0.0/0:0 

[DKav]

emnoc wrote:

yes, just ensure unique names and ip address for phase1/2 details. You could build a template and just add the ph1/ph2 name and remote-gateway .By default route-based vpn proxyid are 0.0.0.0/0:0 

Thanks a lot, very helpful.

Is there any documentation on building this type of job?