Set Link Speed and Duplex

[sfales]

Hi: I' ve got a FGT 81WiFi and I want to hard-set Link speed and duplex for the INTERNAL network. I can set link and duplex for wan1 with no problem. THis is what I' ve tried... config sys int edit internal that' s it... no option to set SPEED. This must be because INTERNAL is really referring to a port group, not the actual interface. How do I set SPEED on the interface? Thanks, Scott

[Dave_Hall]

Under 4.0MR3, you can use the following to set the duplex/speed on the Internal interface:

config system global set internal-switch-speed {100full | 100half | 10full | 10half | auto } end

If you want to set the ports individually, you will need to break the internal interface into " interface mode" .

[sfales]

Great! Thanks! I couldn' t figure out where to find that.