Security Fabric Connection check box is missing when setup AP point

[steve2688]

Hi All,

may i know how come the check box of Security Fabric Connection is missing in my forti 200D, but i can find in 200E

200D

[size="5"]200E[/size]

Struggle for a few day.

Thanks.

[GDiFi]

My guess is you are running 6.4 on your 200E while on your 200D you are running and older firmware version.  There was a change in 6.4 to the Access options:

https://community.fortinet.com/t5/FortiGate/Technical-Tip-Security-fabric-connection-setting/ta-p/19...

[Debbie_FTNT]

Hey @steve2688 

Security Fabric connection is a combination of the CAPWAP and FortiTelemetry settings, as noted in the KB linked by @GDiFi .

If you hover your mouse over the little 'i' icon next to Security Fabric Connection, the FortiGate GUI will inform you of that as well :).

[C-Gielen]

Hi,

On the 200d you will never find it. But use telemetry and capwap instead.

Goodluck with your ap's!

[steve2688]

Thanks for the Sharing, my problem solve