Greetings folks, having a bit of a problem with some config.. running a 60E with 5.4.1, and I'm trying to figure out some way to get access to the DSL router connected to the wan interface.. It's pre-configured with 192.168.1.1/24, but since the physical interface it's connected to also needs to run PPPoE, there doesn't seem to be any way to add a secondary address on it to add it to that same subnet for the local network.
I can't imagine this is that uncommon a requirement, yet the only info I can find seems to be old and essentially unsolved. Am I missing something painfully obvious somewhere?
Nominating a forum post submits a request to create a new Knowledge Article based on the forum post topic. Please ensure your nomination includes a solution within the reply.
One thing I've noticed while messing around trying to find a solution.. I've created a loopback interface, 192.168.1.251/24.. On a whim, I tried pinging the modem's IP on .1 of that subnet. Imagine my surprise when I got replies! tried a telnet, found it connecting back to the fortigate. Tried another address in the subnet.. same result.
So.. am I correct in assuming that it's claiming _every_ address in the subnet it's been defined in? That seems somewhat broken to me. Do I need to define the loopback as a /32 then add a static route for the rest of the /24 or something?
Select Forum Responses to become Knowledge Articles!
Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.
User | Count |
---|---|
1679 | |
1085 | |
752 | |
446 | |
226 |
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.
Copyright 2024 Fortinet, Inc. All Rights Reserved.