I currently have 2 x fortigates configured in a VRRP group. There are 2 x VLANs on both Fortigates and both Fortigates are VRRP master for one VLAN and backup for the subsequent VLAN. e.g. FW1 is master for VLAN 100 and FW2 is master for VLAN 200. FW1 is backup for VLAN 200 and FW2 is backup for VLAN 100.
I have configured split DHCP scopes on both fortigates so that if one goes down or connectivity is interupted, the other will serve DHCP addresses to clients.
Is there any way to set a delay in DHCP response on the FG to the secondary (VRRP backup) DHCP server so it will only offer an address if the primary VRRP firewall doesnt beat the backup unit? If not - how would I go about having this added as a feature request?
I went for VRRP over HA for capacity and granular policy control on the backup VLAN in a fail-over scenario. Session sync is not at all important in the current environment.
The alernate solution is to move DHCP server to Windows servers.
Nominating a forum post submits a request to create a new Knowledge Article based on the forum post topic. Please ensure your nomination includes a solution within the reply.
It probably wouldn't work well if both FGs or any other DHCP server devices share the same range of IPs. Both don't know what the other leased to the clients.
The scopes are split so that each FW doesnt need to know about what the other FW has served.
e.g.
FW1 - 192.168.0.1-192.168.0.176
FW2 - 192.168.0.177-192.168.0.253
If so it wouldn't matter which offer the client picks, wouldn't it?
Whilst it shouldnt matter which one responds, like a MS Windows DHCP server I would prefer to set which one answers first so as not to exhaust the scope of the backup(secondary) DHCP server.
e.g. FW1 responds immediately for VLAN 100 and FW1 responds after 1500ms for VLAN 200
then vice versa for FW2 - responds immediately for VLAN 200 and responds after 1500ms for VLAN 100
e.g. In MS Windows you would set a delay under the Advanced tab
I'm not trying to discredit your claim but I'm just curious from the technical aspect. If the one of them has exhausted IPs, wouldn't the client pick another offer from the other FG?
Did you ever find a solution to this? I'm interested in similar functionality.
Select Forum Responses to become Knowledge Articles!
Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.
User | Count |
---|---|
1733 | |
1106 | |
752 | |
447 | |
240 |
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.
Copyright 2024 Fortinet, Inc. All Rights Reserved.