Sdwan

[espositop2004]

Hi all,

I'm new of this community.

For my customer recently I have configured "Sdwan" on Fg60E.

I have two connections and when I try to simulate interface or drop connections, I can continue to work with no problem but, when I put the cable, that I have remove before, I have a lot of request timeout that, after some minutes, the situation is  ok.

On my Fg60E I have configured the Sdwan in this way:

•  SLA Target 60 ms
• Jitter 10 ms
• packet loss threshold 2%
• policy sdwan are configured to maximize bandwidth.

I hope that the community help me to identify the problem.

Many thanks in advanced for your time.

[AEK]

Hi

First of all check FGT logs to see why the connections are failing. The log details (right pan) can say a lot about the issue.

[espositop2004]

Hi,

many thanks for your reply.

I read messages on FGT and there was a connectivity problem.

Tks