Sdwan rules page shows nothing

[rezafathi]

Hi

Today I upgraded my fgt to 7.4.2 version but on sdwan rules page it does not show anything. In cli i can see my sdwan rules. What is wrong?

[AEK]

Hello

• Are the SD-WAN rules still working properly?
• Did you follow the upgrade path?
• Please share the output of:  get system startup-error-log
• In case you use Firefox then try with Edge or Chrome

[hgarara]

Hello,

If its the issue with GUI spinning(loading) or showing blank page while trying to access sd-wan rules page right after upgrading to 7.4.2(its a cosmetic bug reported internally). The schedule is to be fixed in 7.4.3

hgarara

[rezafathi · Accepted solution]

Hi

i did solve that by removing all sdwan rules from cli.

[NguyenHai]

pls help me, how to delete it

[pginete]

You may use the commands below to remove all the SD-WAN rules via CLI.

config system sdwan

config service

purge

end

end

Make sure to backup the FortiGate configuration first before performing this.

Thank you.

[khangna185]

Can someone help me fix this issue version 7.4.3 Our company has a lot of SD-WAN rules, and I'm concerned that deleting all the SD-WAN tables would not be appropriate. We are experiencing this problem on over 10 devices.

[AEK]

You can do it like this during the maintenance window.

1. Backup your config
2. Copy your sdwan rules to notepad

   config system sdwan
     config service
       show
         <copy the output to notepad>

3. Delete sdwan rules
4. Restore them from notepad

   config system sdwan
     config service
       <past the config from notepad>

5. In case of major issue just restore the FG config from full backup

[CarlosKalyel]

Hello, in some tests I did, I noticed that when using more than one item in source the SD-WAN Rules page does not load, so I just separated and created groups to add to the rules.

[AEK]

Hi. Which FortiOS version?