Hello everyone! First of all, I recently started working with Fortigate firewalls and SSL VPN, so it is not a field where I have a whole lot of past experience. Equipment: Firewall: FortiGate 60E FortiOS: V6.0.7 build0302 Whenever a client connects to the SSL VPN, it will drop the internet connection for a few min and then return. Under Network and Sharing Center it will look like this afterwards:
Problems: - Internet access does not always make a return when connected to the VPN, especially on WiFi. - When the internet access returns, it is with a very minimal speed, compared to before connecting to the SSL VPN. If the VPN is disconnected, then the speed goes back to normal. SSL VPN Policy: Policy 1: Incoming interface: SSL-VPNN tunnel interface (ssl.root) Outgoing interface: Wan1 (Outside connection) Source: all (any 0.0.0.0) and SSL-VPN-Users (our group to identify users). Destination: all (any 0.0.0.0) Service: ALL Action Accept NAT: Turned on IP Pool Configuration: Use Outgoing Interface Address Policy 2:Incoming interface: SSL-VPNN tunnel interface (ssl.root) Outgoing interface: Internat network Source: all (any 0.0.0.0) and SSL-VPN-Users (our group to identify users). Destination: Local network (xxx.xx.x.x) Service: ALL Action Accept NAT: Turned on IP Pool Configuration: Use Outgoing Interface Address Any sort of help is much appriciated. ;)
Select Forum Responses to become Knowledge Articles!
Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.
User | Count |
---|---|
1740 | |
1108 | |
752 | |
447 | |
240 |
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.
Copyright 2024 Fortinet, Inc. All Rights Reserved.