SSL VPN Issues

Report Inappropriate Content · ‎05-03-2010

I am having an issue with the SSL VPN. Everything " seems" to be configured correctly as far as I can see but when I try to log into the portal page (any) I get a Permission Denied on the Login screen. I am using local users and have tried to reset, replace reveiw and regroup them. This is a new install so it has never worked. Is their some obvious step that I might have skipped?

MisterAG · ‎05-07-2010

VPN > SSL > Config Tab Enable SSL-VPN is checked? User > user Group > SSL VPN > Group Name You have a User group configured with group type SSL-VPN? *** A User Group of Local Users is in the list of Members? *** Enable SSL-VPN Tunnel Service is checked? Do you have any restrictions on the IP range for the user group?

rwpatterson · ‎05-08-2010

Welcome to the forums. What firmware version are you running? Is the source of the policy ' ALL' ? Is this tunnel mode or web mode?

Bob - self proclaimed posting junkie!
See my Fortigate related scripts at: http://fortigate.camerabob.com

Report Inappropriate Content · ‎04-17-2011

I recently encountered this and resolved it as follows: The policy WAN1->Internal [SSL-VPN] was incomplete. When I edited the policy, the checked " Enable Identity Based Policy" section included a single rule which I then edited to select my SSL VPN User Group. Once I explicitly added my SSL VPN User Group and made sure I' d also selected " ANY" service, authentication worked properly.