SSID bridge or tunnel mode

[Pikok]

Hello everyone

Network requirements:
One SSID
100 - fortilink vlans
There will be wired and wireless devices in each vlan, they must be in the same subnet/broadcast domain.
400 devices

What is better to use?

SSID with MPSK in bridge mode
or
SSID with MPSK in tunnel mode + software switch (ssid vlan + fortiswitch vlan)

or is there another solution?

[adambomb1219]

Why 100 VLANs? Why should they all be in the same broadcast domain?

This question is impossible to answer without more details. Bridge mode or tunnel mode depends 100% on the requirements and the rest of the access network design.

[Pikok]

This is a hotel, we don't want the guest to see the TV from another room while sharing the screen from e.g. an iPhone to the TV in his room

The point is that both solutions I suggested do this, but I wonder which one is more appropriate

[adambomb1219]

I would say Bridge mode for this just to prioritize performance and reduce latency for this TV/sharing use-case.

That being said, there are far better ways to handle this type of hospitality use-case.

[Pikok]

Can you elaborate on your idea regarding better methods?

We have FGT+FSW+FAP at our disposal, is there something better to configure on the devices in this case?