[SOLVED] Dialup user must ping/access remote site thru Head Office ipsec tunnel

[Fullmoon]

Hello guys,

I need to work thing as stated in my subject.

Gates are now up and running between HQ and remote site thru Interface based VPN. Dialup user also able to access HQ local resources. Both Gates QMS are set to 0.0.0.0/0

Next phase would be, DialUp user/s must able to access remote site via HQ thru the existing IPSec tunnel.

HQ Policies

DialUP to VPN Tunnel Virtual Int. and v.v (NAT disabled)

Remote Policies

LAN to VPN Tunnel Virtual Int. and v.v (NAT disabled)

Remote Routes

Destination: 172.31.16.0/24

Device: IPSec Virtual Int

Still my dialup user unable to access remote site local resources. Any help is much appreciated.

This link looks similar but no success on my part.

https://forum.fortinet.com/tm.aspx?m=143658