Nominating a forum post submits a request to create a new Knowledge Article based on the forum post topic. Please ensure your nomination includes a solution within the reply.
PCNSE
NSE
StrongSwan
PCNSE
NSE
StrongSwan
USM decryption errorBe advise, some snmp tools don' t support all of the encryption types. e.g ( under my bsd host ) set authentication protocol (MD5|SHA) set privacy protocol (DES|AES) While others support des , AES and 3des, even tho the specs never selected 3DES for snmp. if in doubt run the test from a unix host with the proper protocol and auth-type Here' s my working SNMPv3 user; config system snmp user edit " nmsuser" set security-level auth-priv set auth-pwd ENC AAAAqop1mfcLSm5tIddCKgN8N157KfKxx59hX12S0uCgVfCYs13kXIpbmuFy1RqiaJzt4MlynF5FfPPjCktNwtxTU/vgLqyOSGNgTp2tu8Lgx4uY set priv-pwd ENC AAAAqop1mfcLSm5tIddCKgN8N157KfKxx59hX12S0uCgVfCYubA1XOW3RWbIPqpk4WbUsT7D1yPFkJGZFSIF35zkbvkF32dnrde2AB0QFn1zyt17 next end This should default to SHA and AES128 for fortiOS. But you are on the right track with your diagnostics.
PCNSE
NSE
StrongSwan
Select Forum Responses to become Knowledge Articles!
Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.
User | Count |
---|---|
1536 | |
1029 | |
749 | |
443 | |
210 |
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.
Copyright 2024 Fortinet, Inc. All Rights Reserved.