Support Forum
The Forums are a place to find answers on a range of Fortinet products from peers and product experts.
jr14
New Contributor III

SFP+ Auto negotiation to SFP

I would like to know if i conect a fortiswitch with an interface SFP+ (10GB) to another Fortiswitch with an interface SFP (1GB), this conection will work ? can auto negotite the speed to 1GB ??? 

I found this on the administration guide 

¨Auto-module speed detection

When you enable auto-module speed detection, the system reads information from the module and sets the port speed to the maximum speed that is advertised by the module. 

NOTE: Auto-speed detection is supported on 1/10G ports¨

 

But i read in a KB that no all fortiswich serie support autonegotiation. 

Can some have test it ? 

FortiSwitch 

 

1 Solution
abelio
Valued Contributor

Hi

When mixing  SFP+ with SFP, avoid autonegotiation; don't let 'auto-negotiate' speed for sfp+, force it explicitely to 1 GB. 

 

regards




/ Abel

View solution in original post

regards / Abel
2 REPLIES 2
abelio
Valued Contributor

Hi

When mixing  SFP+ with SFP, avoid autonegotiation; don't let 'auto-negotiate' speed for sfp+, force it explicitely to 1 GB. 

 

regards




/ Abel

regards / Abel
jr14
New Contributor III

thanks, abelio

I test it and it is working. 

Labels
Top Kudoed Authors