SD-WAN rules priority

[BensonLEI]

Hi, Guys,

I created two SD-WAN rules as the following:

------------------------------------------------------

config service   edit 1       set name "Access_to_Internet"       set dst "all"       set src "all"       set priority-members 1 2 3    next    edit 2       set name "LL_Line-to-16HK-DC"       set dst "16HK_V167_10.16.7.0"       set src "VLAN329_10.32.9.0"       set priority-members 5 4 6    next    end

How can I prioritize the "ëdit 2"  for routing decision, thx a lot ?

Many thanks

[BensonLEI]

Done, thx a lot

[sw2090 · Accepted solution]

just like policies also sd-wan rules are exempt top-down. So put the second one on top to have itmatch first and everything should be fine.