I am following this kb article to reference default routes learned from bgp peers in the sdwan rules. So I created the route map and applied it to the bgp neighbors, however when referencing the tag from the sdwan rule I couldn't find the dst-tag item as mentioned in this part :
config system sdwan
set mode priority
set dst-tag 11
set health-check "datacenter1"
set priority-members 1 2
Seems like the dst-tag is not available, or do I need to enable something else? I tried both in a FG 600D 6.4.12 and a FortiVM (demo) with no luck:
FortiGate-VM (1) # set dst-tag 11
command parse error before 'dst-tag'
Command fail. Return code -61